Bosch SF8172V Specifikace stáhnout pdf (Strana 95)

AXIS Communications

28-8 Camera Handler Release Notes

210A,233D The latest firmware (4.47) in the AXIS 210A camera and some

other VAPIX 2 camera and encoder models have a flaw that

limits the FPS of MJPEG streams to the FPS of an existing

MPEG-4 stream until the MPEG-4 stream is destroyed. For

example, if the configured FPS of two MJPEG streams is 20 FPS

and 5 FPS and the FPS of the MPEG-4 stream is 15 FPS then

the actual FPS of the MJPEG streams will be 15 FPS and 5 FPS

until the MPEG-4 stream is destroyed. Similarly, if the MPEG-4

stream is 1 FPS then the actual FPS of the two MJPEG streams

will be 1 FPS. A workaround is to ensure that the FPS of an

existing MPEG-4 stream is greater that the configured FPS of the

MJPEG streams. Another workaround is to update the AXIS

firmware to an latest version (4.48 for example ) which does not

exhibit this symptom.

214 PTZ When using /AXIS-

cgi/com/ptz.cgi?camera=1&areazoom=<int>,<int>,<int less than

100> AXIS API to zoom out on AXIS 214 PTZ camera, the zoom

position will reverse to maximum zoom in when the request

causes a zoom out to go beyond the widest zoom out position.

This, according to AXIS technical support, is a bug within the

AXIS 214 PTZ camera (v4.40). The above mentioned API is used

by NVR Web client and VE API to perform PTZ Nudge operation.

All VAPIX2 cameras An AXIS VAPIX 2 camera will momentarily disrupt an MPEG-4

video stream as a result of changing the audio codec which

causes the NVR to stop/recreate the video stream. During

recorded playback by Victor Client, a blank image appears for a

very short period at the point in time where the audio codec was

changed.

233D The zoom speed on AXIS 233D is fixed.

Q7406 AXIS Q7406 does not support PTZ positioning query. Hence

NVR will not be able to obtain auto- focus and auto-Iris status.

All PTZ cameras 1 Due to AXIS cameras limitations the NVR is not able to

use the same HTTP connection for multiple PTZ

functions, which might result in higher PTZ latency.

2 Due to camera behaviour the Iris settings of the camera

changes very slowly, the NVR web page needs to be

refreshed in order to be updated with this change.

Q7406, 241Q, 243Q AD Ultra 8 analog PTZ are not supported on Q7406, 241Q and

243Q

212 1 AXIS 212 can’t pan or tilt if the camera is in full zoom out

mode.

2 AXIS 212 can’t zoom out stop near full zoom distance

and cannot set to full out.

223M Stream settings should be configured before enabling Motion

Detection.

All Megapixel cameras The NVR web client provides no control for changing the “capture

mode” of an Axis P1346 camera and other megapixel cameras.

Therefore it may be necessary to use the camera’s own web GUI

to set the desired capture mode to enable the use of associated

video resolutions. After changing the capture mode, it will be

necessary to refresh the NVR web client camera details page to

select from the currently available resolutions.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 174 175

Komentáře k této Příručce

Žádné komentáře

Bosch SF8172V Specifikace Strana 95

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Bosch SF8172V