
AXIS Communications
28-6 Camera Handler Release Notes
29 As Auto-Iris is enabled by default, in order to adjust IRIS+
and IRIS- through Victor, the Auto Iris checkbox must be
disabled via the NVR webpage. The Victor surveillance
window needs to be refreshed (drag camera back in
surveillance pane) in order for the Iris panel to be
updated with this change.
30 Due to an Axis API limitation, Patterns are not supported
on this handler.
31 Input/output settings should be configured on the camera
before adding to the NVR, if these are required for NVR
integration.
32 Digital PTZ is not supported on this handler.
33 When using search and retrieve on Victor to search for a
“Motion Detection” scene, in order to get maximum
results, it is recommended to set the “amount of motion”
and “duration” to “0.”
34 Edge Motion detection from 4.4 onwards will show on the
Victor Client using the name of the motion event as set
on camera GUI – default name used on camera is “[0]
Default window.”
All Encoders 1 Due to limitation in the Axis Encoder PTZ support, AD
Ultra 8 analog PTZ presets are not supported on Axis
Encoders.
2 When working with Axis encoders the number of Presets
is supported at:
a 32 for Pelco analog cameras. It is known from Axis
that this is a Pelco driver limitation (Axis ticket
317074).
b 20 presets on M7001 encoder (Axis Encoder
limitation)
c 50 for Bosch analog cameras
3 Preset capabilities for the UltraDome 8 analog cameras
do not function properly with the Axis encoders. This
issue is not limited to the Victor Client; it occurs when
trying to add/select/delete presets through the Axis web
interface itself as well. This is an Axis encoder issue. As
AD Ultra 8 analog cameras do not support presets, they
can be added on NVR GUI and victor client, but do not
function when executed.
4 The original NVR requires Axis cameras to have absolute
PTZ capabilities in order to support PTZ presets. Since
Axis tech support guarantees that their encoders will
support preset functionality even if the absolute PTZ is
absent, the fix will always enable the preset support for
all Axis encoders as long as the PTZ is enabled both in
the NVR and the Axis encoder.
Komentáře k této Příručce