Bosch SF8172V Specifikace stáhnout pdf (Strana 110)

Dahua

31-3

• User needs to enable Edge based motion detection on the camera WebGUI before enabling on

the NVR

• Camera Audio and Dry Contact will need enabled on the camera prior to enabling these on the

NVR, as the handler cannot directly enable these features

• The Camera handler will report an incorrect Bitrate range of 1 ~ 32000 Kbps (camera issue) its

suggested user refers to camera WebGUI to determine correct supported bitrate range

(1~24000 Kbps). If an incorrect Bitrate is set via the NVR the camera will retain the previous

valid bitrate setting and may not display the correct value on the NVR GUI

• On the NVR "Function & Streams" page, Stream 1 is associated to camera's "Main Stream"

profile; Stream 2 is associated to camera's "Sub Stream" profile.

• Camera is set to auto-reboot for 60 seconds by 2:00AM everyday by default setting (this will

result in a 60 seconds video loss), however this can be disable in camera WebGUI.

Limitations

Model Limitations Work Around

All Stream 2 (MJPEG) quality may be reduce

automatically when dual streaming at high

resolution.

Reason: Camera limitation

User can control Bitrate in the camera

WebGUI to ensure the MJPEG's image

quality is acceptable.

MJPEG quality will not display on NVR web

page however camera will not support it - to

control MJPEG use camera web GUI Bitrate

setting.

HDB3300,

HFW3202C

There will be periodic frame loss when dual

stream is enabled with these settings (H264

25fps/1080P + MJPEG 25fps/D1 +audio).

Lowering MJPEG will prevent a high loss of

FPS

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 174 175

Žádné komentáře

Bosch SF8172V Specifikace Strana 110