Bosch KGF Series Specifikace stáhnout pdf (Strana 34)

---

Draining Working Chamber

When you plan to put the equipment out of service for a long time, be sure to drain the working

chamber to prevent the clogging of pipes. After checking that the working chamber

has

been

sufficiently cooled, drain the chamber in accordance with the following procedure.

CAUTION

Do not unload the exhaust bottle or drain the working chamber when the chamber

under

pressure. Boiling water or steam may gush out, and you may get burned.

Open the lid.

Connect one end of the attached drain hose

to the tap of the drain valve located at the

lower part of the right side of the body.

Put the other end of the hose in a container.

Remove the exhaust bottle from the body.

Turn the drain valve knob, which is located

at the bottom of the exhaust bottle housing

area, counterclockwise to open it.

Check if draining working chamber is

complete.

Turn the knob clockwise to close the drain

valve.

the

valve

with

reliability.

Bottle housing areal

Cleaning Working Chamber

The heater is provided with a temperature sensor, be careful not to damage it while cleaning.

cAuT1oN

Take out the bottom plate to see

the bottom of

Inside the Chamber

the working chamber or the surface of the heater

Heater

is dirty. After draining the chamber, clean them

with

soft brush or the like while sprinkling water

with the drain valve open.

If the temperature sensor clip comes loose,

reattach it

close to the heater as possible.

Please contact us or our authorized sales outlet for

the chamber cleaning detergent "Lister".

Fixing

clip

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 45 46

Komentáře k této Příručce

Žádné komentáře

Bosch KGF Series Specifikace Strana 34

Komentáře k této Příručce

Související produkty a manuály pro ne Bosch KGF Series