Bosch KGF Series Specifikace stáhnout pdf (Strana 20)

Sterilization time:

minute increments within a range of 1-250 minute

Liquefaction temperature: In increments of 1°C within

range of

60-

100°C

Liquefaction

time: 1 minute increments within a range of

1-60

minutes

Warming temperature:

1°C

increments with a range of 45-60°C

EXHT

increments within a range of 0-100%

If you hold the switch down, the displayed value increases or decreases

in 10 unit increments. When the displayed value exceeds the upper

limit (lower limit), it returns to the lower limit (upper limit).

Press the

SETLENT

switch.

The changed value is stored, the display stops flickering

and

lights

up.

This completes the setting.

I-

Canceling Changing the

Set

Values

If halfway you desire to cancel the setting change, press the

MODE

switch. The changed value is not stored, and the equipment returns to a

standby state.

NOTE

For sterilization of liquid, set a sterilization time longer than desired, taking delay time into

account and referring to the table below.

Example)

case there is 3 liters of water in a flask, it takes nearly 30 minutes (delay time) for

temperature

water in the container to reach a set sterilization temperature after

temperature in the working chamber reaches the set value. You should set a sterilization

time 30 minutes longer than desired to cope with this delay of time. Therefore, the set

sterilization is

minutes:

Set sterilization time

(50

minutes)

Delay

time (30 minutes)

desired sterilization time

(20

minutes)

Set

sterilization

HV-50

Reference Values

Delay

Time

Dehy,time:

~~~=

Sterilization

time

(per Flask)

Quantity

Liquid

liters

liter

minutes

Temperature

working

chamber

HV-50

Delay Time Reference Data

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 45 46

Komentáře k této Příručce

Žádné komentáře

Bosch KGF Series Specifikace Strana 20

Komentáře k této Příručce

Související produkty a manuály pro ne Bosch KGF Series