Bosch Solution 144 Uživatelská příručka Strana 32
- Strana / 44
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Solution 144
32 Bosch Security Systems 04/12 BLCC600U
User Guide
L
Keypad 001 Volume
Press
SAVE
OK
to
H
2. Use the [] and [] keys or use the [] and [] keys
to increase or decrease the volume of the keypad
buzzer until the desired volume has been reached.
3. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Devices > Commands >
Contrast
MENU 6-0-8
This menu allows you to adjust the contrast of the keypad’s
LCD display. Each keypad can have their display adjusted
separately.
Enter programming mode (PIN + MENU) then,
1. Press [MENU] + [6] + [0] + [8].
The keypad will display the contrast screen.
L
Keypad 001 Contrast
Press
SAVE
OK
to
H
2. Use the [] and [] keys to adjust the bar until the
desired contrast is reached.
3. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Devices > Commands >
Backlight
MENU 6-0-9
This menu allows you to adjust the brightness of the
keypad’s LCD display backlight. Each keypad can have
their display adjusted separately.
Enter programming mode (PIN + MENU) then,
1. Press [MENU] + [6] + [0] + [9].
The keypad will display the backlight screen.
L
Keypad 001 Backlight
Press
SAVE
OK
to
H
2. Use the [] and [] keys to adjust the bar until the
desired backlight is reached.
3. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Devices > Keypads & Readers >
Name
MENU 6-1-0
This menu allows you to program the name for each keypad
or reader connected to your system. Each name can be up
to 20 characters. You should program a name that help
to identify where the device is located in the building. eg.
Front Door Reader.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [6] + [1] + [0].
A list of available devices will display on the keypad.
2. Use the [] and [] keys to select the device name
that you want to change, then press [OK] to select.
The keypad will display the following:
Name Kp1
Keypad 1 Name
Press
OK to SAVE
3. Use the [] and [] keys to scroll the cursor left and
right across the device name text. Use the [] and
[] keys to scroll through the dierent characters
available. To clear all text from the cursor position
to the right, press the [OFF] key.
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Devices > GSM/GPRS Module >
Trigger Table 1
MENU 6-5-5
This feature requires that the optional GSM radio module
be installed on your system.
This menu allows you to program a list of up to 10 phone
numbers which can be used to remotely operate one or
more outputs on the system which have been congured
by your installer. This function could be used to open a
gate or roller door by simply calling the phone number of
the GSM radio module that is the system is connected to.
When the GSM phone is ringing, the system will check if the
incomming call is from a number which has been entered
into the trigger table and if the numbers match then any
outputs programmed to operate by numbers in trigger
table 1 will operate.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [6] + [5] + [5]. A list of programmed
phone numbers will display on the keypad.
Phone 1= +61423474345
Phone 2= 0296438451
Phone 3=
Press
OK to SAVE
2. Use the [] and [] keys to select the phone number
to add or change, then press [OK] to select.
The keypad will display the following:
- Solution 144 1
- TELEPERMIT 2
- Contents 3
- Program Menu Tree 4
- Introduction 5
- Features 5
- User’s Guide 5
- Status Icons / LED’s 7
- Keypad Tones 7
- Basic System Operation 8
- Turning An Area All On 8
- Turning The System Off 8
- Duress or Silent Alarms 10
- System Programming 10
- Erase User 10
- PIN Numbers 11
- Change Own PIN 11
- Change Other PIN 11
- Delete Token 12
- Token Status 12
- Delete PIN 12
- Add Token 12
- Edit Token 13
- RF Keyfob 13
- Add Keyfob 13
- Delete Keyfob 13
- User Name 13
- Area Assignment 14
- User Options 14
- TimeZones 14
- TimeZone Access 14
- Door Assignment 15
- User Expire Date 15
- Fingerprints 15
- Add Fingerprint 16
- Delete Fingerprint 16
- Fingerprint Status 16
- Area Status 16
- Area 1 Name 17
- Fri,Aug,13 5:34 pm 17
- Chime On/O 18
- Chime Mode 18
- Area Name 18
- Part Mode 1 Name 19
- Part Mode 2 Name 19
- Auto Arming 19
- Exit Time 20
- Reception Area 20
- Entry Time 1 20
- Entry Time 2 20
- Solution 144 User Guide 21
- OK or MENU 21
- Set Chime Zones 22
- Set Part 2 Zones 22
- OK to SAVE 23
- Output Status 24
- Turn Output On/O 24
- Output Array 25
- Door Status 25
- Door Array 25
- Door Override 26
- Output Name 26
- Door Name 26
- External Siren Test 27
- Internal Siren Test 27
- Strobe Test 27
- Communication / Reporting 27
- User Guide 28
- Destination 2 29
- Call Forward On 29
- Call Forward O 30
- User RAS PIN 30
- Email Reporting 30
- Email Address 30
- Email Options 31
- Send Test Report 31
- Devices and Optional Modules 31
- Device Status 31
- Contrast 32
- Backlight 32
- Trigger Table 1 32
- Trigger Table 2 33
- SMS Control 33
- System Events 34
- Panel Status 34
- System Trouble 34
- History Log 36
- Set Date & Time 36
- Start / Stop Day 38
- Keypad Hi/Lo Temp 39
- Site Name 39
- Walk Test All Zones 39
- Battery Test 40
Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Bosch Solution 144
(7 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.036 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce