
Visit us at...
www.stanleypac.com
K2001-P READER WITH PIN KEYPAD
20
The K2001-P Proximity Reader with PIN Keypad is vandal-resistant,
weather-resistant, and made of heavy-gauge steel. The K2001-P Proximity
Reader with PIN Keypad requires a valid credential (card, token, or tag)
and a unique personal identification number (PIN) from each user. You
must enter the PIN with the reader’s standard membrane keypad. You can
also program the reader to require only a valid credential during certain
times of the day.
Features
Vandal-resistant
High security access control
Flexible programming for PIN requirement
Invalid PIN response
LED indicator
Suitable for interior or exterior installations
Soft, standard, membrane keypad
Reads K2000-Series credentials
Certifications and Approvals
UL Standards UL 294, Access Control System Units
Connection Considerations
Use a six-wire cable for applications that have a door contact and a
Request-to-exit device
If you use 18 AWG (1.2 mm) wire, you can place the reader
up to 3000 ft (914 m) away from the door controller.
Technical Specifications
Keypad:
10-digit standard membrane with visual target
area that senses valid credentials.
Connections 1.2 mm (18 AWG) four-wire, six-strand
Environmental Considerations
Relative Humidity
0% to 90%, non-condensing For UL Listed
applications, 0% to 85%, non-condensing
Temperature (Operating)
-45°C to +50°C (-49°F to +122°F) For UL 294
applications, -35°C to +60°C (-31°F to+140°F)
Indicators One LED that emits red or green light
Power Requirements
Current (Maximum): 120 mA
Voltage (Input): 12 VDC nominal supplied by the door controller
Voltage (Operating): 12 to 18 VDC, supplied by door controller
Back Box Dimensions
13.5 cm x 7.1 cm x 3.8cm (5.3 in. x 2.8 in. x
1.5in.)
Reader Dimensions 14.5 cm x 10cm(5.7 in. x 4in.)
Ordering Information
K2001-P Proximity Reader with PIN Keypad K2001-P 7S-K2001P
Komentáře k této Příručce