Bosch K2200 Series Instalační příručka stáhnout pdf (Strana 11)

K2200 Series | Installation Guide | 2.0 K2200 Series Controllers EN | 11

Bosch Security Systems | 7/03 | 17375 1.3 / 46513C

2.3 Features

This section describes the features available on the

Readykey K2200 Series Controllers.

Note:

Many of the Readykey K2200 Series Controller features

are only available using Readykey for Windows.

2.3.1 Summary of Features

The following table provides a summary of the controller features. Fuller details are provided later in this

section.

Table 5: Summary of Features

Features Comments

Reader channels The K2200 series has a new terminal which allows you to have an in and out reader

(Readykey readers only) on each channel.

Faceplate Each controller can be purchased without a faceplate. However, at least one is required

for basic configuration

Controller type and

software version

Pressing the [?] key on the faceplate displays the controller type, the operating mode and

the software version.

Power supply unit Automatic Input Voltage Detection - PSU operates between 85vac and 250vac.

Lock Output Voltage 8amp PSU - 12 VDC at 2 amps and 24 VDC at 1amp.

4amp PSU is 12 VDC at 1amp and 24 VDC at .5 amp.

Memory module Physically identical to that used in the Readykey K2100 - only the software is new.

Memory backup battery

• Maintains the system’s memory when all power, AC and external battery backup is

removed. Can be replaced without data loss.

Onboard Relays There are 8 relays fitted to the Readykey K2200 Series Controllers. K2100 has only 4

relays.

Default settings applied when the database is initialized.

Readykey for Windows can override settings of relays 1-4 if required.

Alarm event managers AEMs can be attached to all controllers in the series. (1 per channel)

Relays on the AEMs can be programmed to activate on certain events. (K1200

controllers can have 4 AEMs attached).

Dial-back facility The controller can be set to up to dial a CNC when an alarm event happens. (Requires

Readykey for Windows).

Protected communications Only establishes communications with CNC if master key code from CNC is recognized.

(Requires Readykey for Windows).

Remote acknowledgement All alarm events generated must be acknowledged at PC to clear if this is set. (requires

Readykey for Windows).

Transaction filtering Common transactions (e.g. request to exit) can be filtered out and not sent to the

administration system. (Requires Readykey for Windows).

Multiple reader formats Readers with Wiegand output can now be connected directly to the controller. (Requires

Readykey for Windows).

Anti-passback Anti-passback is a feature that prevents a key entering an area until it has been used to

leave that area. Local and global anti-passback is available.

Note:

Global anti-passback only available with Readykey for Windows V6 using the K2200

controllers as a master panel.

Master override input When active, this links the override input on slave door controllers to the master

controller. If triggered on the master, doors on slaves automatically opened. (Requires

Readykey for Windows).

Event time stamping Accuracy can be selected to be to the nearest second. Default is to the nearest minute.

(Requires Ready for Windows

Download times Download times have been significantly improved. Typically, download times for the

Readykey K2200 Series Controllers are 30% faster than for the Readykey K2100/K1100.

2.3.2 Appearance

The Readykey K2200 Series Controllers looks a little

different than earlier controllers. The board is

smaller and has the following additional connectors:

• A RDR1 and RDR2 connectors which allow you

to connect a second Readykey reader on one

channel, giving the option of having an In and

Out reader on each door.

• An additional 4 relay outputs.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 59 60

Komentáře k této Příručce

Žádné komentáře

Bosch K2200 Series Instalační příručka Strana 11

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Bosch K2200 Series