Bosch X40 Uživatelský manuál stáhnout pdf (Strana 46)

46 en | Configuration Using a Web Browser VideoJet X40 SN

DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems

5.17 Advanced Mode: Video Input

You can activate the 75 Ohm terminating resistance for each video input of the

VideoJet X40 SN. The terminating resistance must be deactivated for the video signal to be

looped through. Every video input is closed at the time of delivery.

75 Ohm termination

Select Off if the video signal is to be looped through.

Source type

To allow VCRs to be connected as a video source, you can change the characteristic of the

video source from the preset value of Camera to VCR. VCRs require a more tolerant setting

for the internal PLL as a result of jitter effects caused by the mechanical components of a

VCR.

NOTICE!

The numbering follows the labeling of the video inputs on the actual unit.

NOTICE!

In some cases, selecting the VCR option can lead to an improvement in the video image even

with a camera connected.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 129 130

Žádné komentáře

Bosch X40 Uživatelský manuál Strana 46