Bosch VEN-650V05-2S3F Manuál s instrukcemi Strana 38

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 47
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 37
EX65 Explosion-protected Camera Maintenance | en 39
Bosch Security Systems, Inc. Instruction Manual F.01U.412.061 | 1.0 | 2011.03
6. Lock the back focus locking button.
7. Press and hold the center key for more than two (2) seconds until all menus disappear.
8. Close the side door panel.
10.6 Replacement of the Mounting Cradle
1. Disconnect power from the EX65 and, optionally, remove all connections.
2. Using a 10 mm wrench or the supplied multi-use tool, remove the three (3) M6 bolts
holding the mounting cradle to the mounting surface.
3. Put the EX65 in a safe location.
4. Using a 7 mm wrench or the supplied multi-use tool, remove the seven (7) M4 bolts
holding the mounting cradle to the housing.
5. Install a new mounting cradle in reverse of installation and tighten the seven (7) M4 bolts
to 1.5 ft/lb (2.0 N/m).
6. Finish installation as described in Section 7 Mounting, page 22.
Bosch
Zobrazit stránku 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 46 47

Komentáře k této Příručce

Žádné komentáře