Bosch VEN-650V05-2S3F Manuál s instrukcemi stáhnout pdf (Strana 19)

20 en | Configuration EX65 Explosion-protected Camera

F.01U.412.061 | 1.0 | 2011.03 Instruction Manual Bosch Security Systems, Inc.

6 Configuration

Making Adjustments to the Camera Lens

You must remove the front end cap to make lens adjustments. You may need to remove the

inner bracket assembly for easier access to the lens controls.

Camera adjustments may be done remotely via the Bilinx “through the coax” interface or

directly on the camera itself by removing the inner bracket assembly. When the Bilinx

communications link is active, the buttons on the cameras are disabled. See

Section 8 Operation, page 24, for more information.

1. Loosen the set screw on the front end cap using the supplied hex key.

Note: Take care not to drop the end caps to prevent damage to the cap threads.

2. Loosen the front end cap using the supplied multi-use tool. To prevent damage to the o-

ring, for every half turn counterclockwise turn back one quarter turn clockwise.

3. Unscrew the front end cap by hand. You may need to remove the sunshield to remove the

front end cap more easily.

4. To adjust the lens and to access the Dinion menu buttons:

a. Using the supplied multi-use tool, loosen the three (3) bolts (Item 1, below) that

hold the inner mounting bracket assembly.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 46 47

Žádné komentáře

Bosch VEN-650V05-2S3F Manuál s instrukcemi Strana 19