Bosch TOURING 7500 SERIES Návod k obsluze stáhnout pdf (Strana 74)

2. Type in user name and password and click Connect.

If the connection to the encoder is established successfully, the configuration settings in

the Protocol settings group are active.

If you do not want to wait until the connection is established, click Skip.

3. In the Type list, select ONVIF.

4. In the Stream and Token lists make the required settings.

5. If required, type a name for the camera in the VSG Camera Name column.

6. Click OK.

7. Click

.

See also

– Add/Edit dialog box (Video Streaming Gateway), page 179

Configuring multicast for VSG

Main window > Devices > Expand > Expand > Expand >

For each camera assigned to a Video Streaming Gateway device you can configure a multicast

address with port.

To configure multicast:

1. Click to enable multicast.

2. Type in a valid multicast address and a port number.

3. If required, configure continuous multicast streaming.

4.

Click .

See also

– Multicast tabs (Video Streaming Gateway), page 180

Switching on VSG recording

Main window > Devices > Expand > Expand > Expand >

To switch on:

1. Click the Recording Profiles tab.

2. Select the line of the camera, for which you want to switch on recording.

3. In the Recording list, select On.

4. Click

.

Recording for this camera starts.

See also

– Recording profiles tab (Video Streaming Gateway), page 180

11.5

11.6

74 en | Managing Video Streaming Gateway Bosch Video Management System

2013.07 | V1 | Configuration Client Configuration Manual Bosch Sicherheitssysteme GmbH

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 259 260

Komentáře k této Příručce

Žádné komentáře