Bosch DIVAR AN 5000 Uživatelský manuál Strana 30

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 162
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 29
RS-485 KEYBOARD
power to
keyboard
keyboard
control
RJ11
+12V
Keyboard cable connector
G
G
+
_
G
G
+
_
G
+12V
CTRL
+12V
_
+
Figure 5.2: Keyboard connector
Specifications
Communication protocol: RS485
Maximum signal voltage: ± 12 V
Power supply: 11 - 12.6 VDC, maximum 400 mA
Maximum cable length: 30 m (using standard 6-core telecom flat cable), or 1.5 km (using
Belden 8760 or equivalent in combination with the LTC 8557).
Cable type: black (cross-over) cable (supplied with keyboard)
Connector: RS485
Ethernet connection
The standard RJ-45 Ethernet socket is used to connect the unit directly to a PC or to a
network. To connect directly to a network hub or switch, use a straight-through network
cable. To connect directly to a PC, use a cross-over network cable. Consult with your local IT
personnel for the specific type of cable needed. The maximum cable length from node to node
is limited to 100 meters (300 feet).
Specifications
1000 Base-T IEEE 802.3ab compliant, 100Base-TX IEEE 802.3u Compliant, 10Base-T IEEE
802.3 Compliant
IEEE 802.3 Compliant RGMII/MII
DSP processing
5.5
30 en | Hardware setup DIVAR AN 3000 / DIVAR AN 5000
2013.11 | 1.1 | AM18-Q0669 Operator Manual Bosch Security Systems
Zobrazit stránku 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 161 162

Komentáře k této Příručce

Žádné komentáře