Bosch Divar 700 Series Provozní pokyny Strana 91

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 120
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 90
Divar 700 Series Advanced configuration | en 91
Bosch Security Systems Installation and Operation manual F.01U.246.471 | v3.6 | 2011.11
6.9.3 Setup - Connection 2
Figure 6.19 Configuration menu - Network - Setup - Connections
Set up the network parameters for the secondary Ethernet port.
–Enable DHCP to have IP address, subnet mask, and default gateway assigned
automatically by the network DHCP server. The actual values are displayed.
If DHCP is disabled, fill in the IP address, and the Subnet mask.
The MAC address is read only; it shows the MAC address of the Ethernet adapter.
Connection shows the status of the physical network connection.
Note:
The secondary network port is limited to the local subnet and does not support remote
access.
Zobrazit stránku 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 119 120

Komentáře k této Příručce

Žádné komentáře