Bosch Divar 700 Series Provozní pokyny stáhnout pdf (Strana 69)

Divar 700 Series Advanced configuration | en 69

Bosch Security Systems Installation and Operation manual F.01U.246.471 | v3.6 | 2011.11

Control tab

– Enable PTZ when a controllable camera is connected. By default, PTZ is disabled.

– Select protocol and device address on PTZ bus. (PTZ commands are transmitted across

the RS485 and Biphase bus simultaneously. Each camera should have a unique address

greater than 0.)

6.2.2 IP Channels

A General tab and a Control tab are available for each camera.

Note:

An IP stream must only be connected to a single channel on a single Divar. There should be no

connection to any other device that could influence the settings of the IP device.

Figure 6.5 Configuration menu - Video & Audio - IP camera

IP camera

If an IP connection has already been configured, the IP address, input type, and stream

number is displayed. If a connection has already been established, a video preview appears.

Note:

The Divar will overrule the encoder profile set in the camera itself if required by the following

settings.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 119 120

Žádné komentáře

Bosch Divar 700 Series Provozní pokyny Strana 69