Bosch NTC-255-PI Uživatelský manuál stáhnout pdf (Strana 22)

22 en | Installation IP Camera 200 Series

AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems

3.7.1 Camera positioning

The camera position can be adjusted along three axes. When

adjusting ensure that the picture display on the monitor is level.

Set the camera to the desired position using the supplied Torx

screwdriver:

1. For vertical adjustment (1), loosen the locking screw and

move the camera housing to the desired angle. Tighten the

screw.

2. For horizontal adjustment (2), loosen the locking screw

and rotate the camera housing around the base. Tighten

the screw.

3. To obtain a horizontal horizon (3), rotate the camera body

as necessary to align the picture shown on the monitor.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 103 104

Žádné komentáře

Bosch NTC-255-PI Uživatelský manuál Strana 22