Bosch VideoJet 8008 Uživatelský manuál stáhnout pdf (Strana 55)

VideoJet 8008 | Installation and Operating Manual

EN | 55

Bosch Security Systems | 2005-06 | V2.0 Configuration using a Web Browser

Note

The settings must be made individually for each video input and each

stream. The numbering corresponds to the labeling of the video inputs on

the rear panel of the unit.

Multicast address Video 1… Multicast address Video 8:

Enter a valid multicast address for each stream from the relevant encoder to be

operated in multicast mode (duplication of the data streams in the network).

With the setting 0.0.0.0 the encoder for the relevant stream operates in multi-

unicast mode (copying of data streams in unit). The VideoJet 8008 supports

multi-unicast connections for up to five simultaneously connected receivers.

Note

Duplication of data places a heavy demand on the CPU and can lead to

impairment of the image quality under certain circumstances.

Multicast port 1 ... Multicast port 8:

If there are simultaneous data streams at the same multicast address, you must

assign different ports to each data stream.

Enter the port address for the relevant stream here.

Streaming:

Click in the checkbox to activate multicast streaming mode for the relevant

stream. The selected checkbox is marked.

Multicast packet TTL:

A value can be entered to specify how long the multicast data packets are active

on the network. If multicast is to be run via a router the value must be greater

than 1.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 135 136

Žádné komentáře

Bosch VideoJet 8008 Uživatelský manuál Strana 55