240 | Matrix Switcher/Control Systems
www.boschsecuritysystems.com
CCTV
Technical Specifications
System Capacities
Model LTC 8100 LTC 8200 LTC 8300
No. Series Series Series
Video Inputs-Standard 8 16 32
Video Inputs-Looping 8 16 32
Video Inputs-Satellite 256 256 256
Video Outputs 2 5 6
Alarm Inputs 8 16 32
Alarm Outputs 2 5 6
Bi-phase Outputs 8 12 16
Keyboards 2 4 4
RS-232 Ports-Console 1 1 1
RS-232 Ports-Printer 0 0 1
Receiver/Drivers-
Standard
816 32
Receiver/Drivers-Satellite 256 256 256
Electrical
Input Voltage Level 0.5 Vp-p to 2 Vp-p
(Composite Negative Sync).
Gain Unity ± 2%
(75 ohm terminated).
Pulse/Bar Ratio 1 94% to 106%.
2T Pulse K Factor
2.5% maximum.
1
Bar Amplitude 1 96% to 104%.
Field Time Waveform Distortion 1-2% maximum.
Line Time Waveform Distortion 1 1% maximum.
Short Time Waveform Distortion maximum.
Video Bandwidth (-3 dB) 25 MHz.
Frequency Response ± 1.0 dB to 12 MHz.
Signal-to-Noise 1 60 dB at 3.58 MHz
Unweighted minimum.
Crosstalk (Typical at 3.58 MHz)
Adjacent Channel -55 dB.
Differential Gain
2% maximum.
1
Differential Phase
1.3° maximum
1
Chrominance Luminance Gain 1 96% to 104%.
Chrominance Nonlinear Phase 1.2° maximum.
Luminance Nonlinearity
4% maximum.
1
Switching: Crosspoint matrix.
DC Output 0 V.
1. Meets EIA/TIA - 250C Medium Haul Standard.
Environmental
Temperature:
Operating +4 °C to +55 °C (+40 °F to +131 °F).
Storage -40 °C to +60 °C (-40 °F to +140 °F).
Altitude 4500 m (15,000 ft).
Humidity 0% to 95% relative, noncondensing.
Electrical - LTC8100, LTC8200, LTC8300 Series Bay
Model No. Rated
Voltage
Voltage
Range
Nominal
Power
1
LTC 810 0 / 50 230 Vac
50/60 Hz
195.5 to 253 10 W
LTC 8100/60 120 Vac
50/60 Hz
108 to 132 10 W
LTC 82 00 / 50 230-240 Vac
50/60 Hz
195.5 to 253 10 W
LTC 8200/60 120 Vac
50/60 Hz
108 to 132 10 W
LTC 8300/50 230-240 Vac
50/60 Hz
195.5 to 253 10 W
LTC 8300/60 120 Vac
50/60 Hz
108 to 132 10 W
1. Power at rated voltage fully loaded.
Connectors:
Video Inputs and
Monitor Outputs
BNC.
Looping Video Connections:
LTC 810 0 Se rie s 8 BNC.
LTC8200 Series One 34-pin ribbon connector used in
conjunction with the LTC 8808/00 video
interconnect panel (not included).
LTC8300 Series Two 34-pin ribbon connectors used in
conjunction with the LTC 8808/00 video
interconnect panel (not included).
External Accessory Interfaces:
CONSOLE RS-232 port for external PC or control
interface (Default = 19,200 baud).9-pin
D-type connector.
ALARMS Inputs use removable screw terminal
connectors. Relay outputs provide alarm
output connections. (Contact rating =
1.5A at 30 VDC).
PRINTER
(LTC8300 Series only)
RS-232 port for system logging printer
(Default = 19,200 baud).9-pin D-type
Connector
BI-PHASE OUT Multiple ports provide receiver/driver
connections when used in daisy chain
configuration. Removable screw terminal
connector blocks.
KEYBOARDS 6-pin RS-485 ports for Allegiant
keyboard use.
(188 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce