Bosch D9000, G Uživatelská příručka stáhnout pdf (Strana 13)

 Galaxy Interface Manual for Bosch G-series Alarm Panels 

Page 13 of 39

2.2 Setting the path to the Alarm Icons

This section describes setting up Workstation Options that are related to alarm features. The settings

for alarm options and the path to the alarm icons are set in the Workstation Options screen.

The multi-media path to the alarm icons must be set to the correct directory for the system to find the

correct graphics used in mapping and displaying status of alarms (see section 4.1).

1. Check the Workstation Options related to Alarm Panel interface:

2. Open Workstation Options screen from SG menu:

Configure > Options > System Settings.

3. Select the Multi-Media tab and verify that the path for the graphic icons is set as needed:

 The default path is set to “C:\Program Files\System Galaxy\Icons”.

Note: If a different directory (shared directory) is used, then browse to that location.

You may need to copy the alarm panel icon-graphics to that location if they have not

already been moved. Also: if the path to the System Galaxy folder has been installed

in a different location than the default installation path, user must browse to the path.

4. Click APPLY and OK to save changes <OR click APPLY and go to next section to set up alarm

options>.

Workstation Options screen – Multi-Media tab (cropped)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 38 39

Žádné komentáře

Bosch D9000, G Uživatelská příručka Strana 13