Bosch CC488 Specifikace stáhnout pdf (Strana 9)

CC484/CC486/CC488 | Operators Manual | 4. Disarming the System EN | 9

Bosch Security Systems | 6/04 | 4998152445B

How to Arm the System in STAY Mode 2

Hold down the [0] button until two beeps sound.

The STAY indicator displays and exit time starts

counting.

Any zones programmed to be automatically

isolated in STAY Mode 2 flash until exit time

expires. At the end of exit time, all zones selected

to be automatically isolated extinguish and the

codepad emits one short beep.

3.10.5 Programming STAY Mode 2 Zones

Programming zones to be automatically isolated in

STAY Mode 2 are only carried out if you have a

Master Code.

How to Program STAY Mode 2 Zones

1. Enter your four character Master Code,

followed by [4] and the [#] button (for

example, [25804#]). Three beeps sound and

the STAY indicator flashes.

2. Enter the zone number to be automatically

isolated, followed by the [*] button (for

example, [1*] = Zone 1, [2*] = Zone 2).

The selected zone flashes. If you make a

mistake, enter the same zone number followed

by the [#] button to clear the incorrect zone.

To select additional zones to be automatically

isolated in STAY Mode 2, repeat Step 2 as

many times as required.

3. Press the [#] button to exit this mode when

you finish selecting all zones to be

automatically isolated in STAY Mode 2. Two

beeps sound and the STAY and AWAY

indicators turn off.

4. Disarming the System

When you enter the premises after the system is

armed in AWAY mode, or if you armed the

system in STAY Mode 1 or STAY Mode 2, you

must disarm the system to disable detection

devices that activate an alarm.

If there was an alarm condition prior to disarming

the system, a flashing zone indicator displays,

indicating a previous alarm on that zone.

How to Disarm the System

Enter your user code followed by the [#] button

(for example, [2580#]). Two beeps sound.

5. User Codes

5.1 Adding User Codes

Only the Master Code holder can add or change

other system user codes, including the Master

Code. Up to eight user codes can be programmed

to operate the system.

How to Add a User Code

1. Enter your four character Master Code,

followed by [1] and the [#] button (for

example, [25801#]).

Three beeps are heard and the STAY and

AWAY indicators flash.

2. Enter the User Code number (1 to 8), followed

by the [#] button (for example, [2#] = User 2,

[8#] = User 8). Two beeps are heard and the

selected user number displays on the codepad

indicators.

3. Enter the digits required for the new code

followed by the [#] button (for example, for

User Code 5768, enter [5768#]). Two beeps

are heard and the STAY and AWAY

indicators turn off.

To add or change other User Codes, repeat

this procedure as many times as required.

5.2 Adding Radio Remote User

Codes

Only the Master Code holder can add or change

other system user codes. Up to eight radio user

codes (User Codes 9 to 16) can be programmed to

operate the system.

How to Add a Radio Remote User Code

1. Enter your four character Master Code,

followed by [1] and the [#] button (for

example, [25801#]).

Three beeps sound and the STAY and AWAY

indicators flash.

2. Enter the radio remote user code number (9 to

16), followed by the [#] button (for example,

[9#] = User 9, [16#] = User 16). Two beeps

are heard and the selected user number

displays on the codepad indicators.

3. Enter the nine digit ID number found on the

back of the radio remote hand held

transmitter, followed by the [#] button. Two

beeps are heard and the STAY and AWAY

indicators extinguish.

To add or change other radio remote user

codes, repeat this procedure as many times as

required.

5.3 Deleting User/Radio Codes

Only the Master Code holder can delete other

system user codes.

How to Delete a User Code

1. Enter your four character Master Code,

followed by [1] and the [#] button (for

example, [25801#]).

Three beeps sound and the STAY and AWAY

indicators flash.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Komentáře k této Příručce

Žádné komentáře

Bosch CC488 Specifikace Strana 9

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Bosch CC488