Bosch Appliances Home Security System DVAS Uživatelský manuál Strana 28
- Strana / 44
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
EN
|
28
Bosch Security Systems | 20 January 2004
DVAS | Instruction Manual | RAID Menu
8.2 Add Volume
To add a volume, you must have an array create free
space available. To create an array, first click the radio
button of the array, from the top of the page.
Once the array has been selected, scroll to view the
amount of space available for each array. With this
knowledge, use the following information to define
the volume parameters.
Enter the Name for the New Volume
Enter the Size of the New Volume in
Megabytes (MB)
Defines the size of the new volume in Megabytes.
Reserve an Optional Free Space Area at
Beginning of the New Volume for Future
Expansion of a Previous Volume
Defines the amount of free space to be reserved
for expansion of the previous volume.
Select Logical Unit Number (LUN) for New
Volume on Host 0/1
Defines the LUN for each volume on either or
both Host Channels. Use the drop down menu
to select each LUN.
A specified LUN can only be accessed by one DVR.
To confirm your choices click Create Volume.
8.3 Expand Volume
To expand the capacity of a volume, a volume must
have been created, with free space available before the
beginning of the next volume. If you only have a
volume with free space, this is acceptable.
Enter the amount of MB to expand the volume by.
Click Expand Volume to advance to the confirmation
page. Select the check box, then click Confirm
Expand Command to continue.
8.4 Delete Volume
Deleting a volume destroys all data on the volume.
Use this command only if you are sure you wish to
delete this information.
Check the box of the volume to be deleted, then click
Delete Volume to continue. Confirm by selecting the
check box, then click Confirm Delete Command.
Figure 29 Creating a Volume
Figure 30 Expanding a Volume
Figure 31 Deleting a Volume
- EN Digital Video Array 1
- Important Safeguards 2
- Safety Precautions 3
- Sécurité 4
- Sicherheitshinweise 4
- Precauciones de Seguridad 5
- Veiligheidsmaatregelen 5
- Sicurezza 5
- Medidas de Segurança 5
- Zasady Bezpieczeństwa 6
- Table of Contents 7
- 1PRODUCT INTRODUCTION 9
- 2UNPACKING 9
- 3PHYSICAL COMPONENTS 10
- 3.2 RAID Controller 11
- 3.3 Hard Drive Assemblies 11
- 4PRODUCT OVERVIEW 12
- 5LED DISPLAY 13
- Status Indicators 13
- 6BEFORE YOU BEGIN 14
- 6.4 Quick Configuration 16
- 6.6 Creating a RAID Set 18
- 7 Bosch GUI 20
- (Graphic User Interface) 20
- 7. 2 Information Menu 21
- 7. 3RAID Array 21
- 7. 4Volumes 22
- 7. 5 Drives 22
- 7. 6 Progress 22
- 7. 7System Information 23
- 7. 8 Disk Statistics 24
- 7. 9 Network Statistics 25
- 7.10 Bad Blocks 25
- 7.11 Problems 26
- 7.12 K e y 26
- 7.13 Event Log 26
- 8RAID MENU 27
- 8.2 Add Volume 28
- 8.3 Expand Volume 28
- 8.4 Delete Volume 28
- 8.5 Map Volume 29
- 8.6 Rename Volume 29
- 8.7 Rename Array 30
- 8.8 Delete Array 30
- 8.9 Add Spare 30
- 8.10 Delete Spare 30
- 9SYSTEM MENU 31
- 9.3 Network Port 32
- 9.4 E-Alert 32
- 9.5 Date and Time 33
- 9.6 Security 33
- 9.7 Cache Settings 34
- 9.8 System Administration 34
- 10 LOG OFF 35
- 11 Additional Information 36
- 12 DVAS Series Disk Array 37
- Technical Specifications 37
- 13 Troubleshooting 38
- Start-up Problems 39
- Resolving Problems 39
- Appendix A 42
- DVAS 43
Bauknecht BIK9 PP8TS2 PT Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Messen, Testen & Steuern Bauknecht BIK9 PP8TS2 PT.
Wir stellen 2 PDF-Handbücher Bauknecht BIK9 PP8TS2 PT zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Betriebsanweisung
Komentáře k této Příručce