Bosch D1255RB Instalační příručka stáhnout pdf (Strana 56)

D9412GV2/D7412GV2 | Operation and Installation Guide | 10.0 Off-Board Relays

56 Bosch Security Systems, Inc. | 7/09 | F01U003641-04

10.2.2 Installation

Install the D811 in the enclosure with the control

panel (Figure 27) or in an adjacent enclosure no more

than

1.5 m (5 ft.) from the control panel. Use 1.5 mm

(16 AWG) to 0.8 mm (22 AWG) wire.

To install D811 Modules in the enclosure with the

control panel:

1. Align the D811 Module with any of the four

mounting locations in the enclosure (Figure 2 on

page 15).

2. Using the screws provided with the module,

secure it in the enclosure.

Use the D137 Mounting Bracket or D9002

Mounting Skirt to install D811 Modules in

enclosures with no available module mounting

locations.

10.2.3 Wiring Connections

Power down the control panel to connect D811

Modules as shown in Figure 27 on this page and

Figure 28 on page 57.

The D811 for Relay 53 connects to

Zonex 1.

The D811 for Relay 117 connects to

Zonex 2 on the D9412GV2.

Figure 27: D811 Module Wiring to the D9412GV2

Reset Pin

Disable All Except Battery

Charging And Programming

PERIPHERAL DEVICE CONNECTIONS

RED POWER +

YELLOW DATA BUS A

GREEN DATA BUS B

BLACK COMMON

ZONEX OUT 1

ZONEX IN 1

N.F.P.A.

Style 3.5

Signaling

Line

Circuits

ZONEX OUT 2

ZONEX IN 2

ZONEX POWER +

ZONEX COMMON

21 22

GND

AUX

DATA

GND

AUX

DATA

GRN

D5200/D5360

PROG CONN

Point 8

S3 Option

Closed = 1K

EOL

Normal Operation

Open =AB-12 UL

Bell Box 220 K

1 - D811 for Relay 53

2- D811 for Relay 117

3- On-board points

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 103 104

Komentáře k této Příručce

Žádné komentáře

Bosch D1255RB Instalační příručka Strana 56

Komentáře k této Příručce

Související produkty a manuály pro Numerické klávesnice Bosch D1255RB