
Add storage page
This page allows the addition of additional iSCSI storage devices
For limitations, refer to the datasheet available in the online
catalog.
Notice!
If the wizard stops and the message appears, that the internal
iSCSI storage is not ready for recording because the LUNs are
not formatted, you must format the LUNs using Bosch VMS
Configuration Client.
To format the LUNs, see Bosch VMS Configuration Manual,
Chapter Formatting a LUN.
28 en | System setup - first steps DIVAR IP 3000
2013.09 | V4 | DOC Bosch Sicherheitssysteme GmbH
Komentáře k této Příručce