Bosch DiBos Micro Instalační příručka stáhnout pdf (Strana 46)

46 en | Default Configuration DiBos/DiBos Micro

F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH

6.2.2 Setting up Dome Cameras and Pan/Tilt Cameras

Video and audio connections menu > Camera section > Edit button

Make the settings for each camera as required.

Making interface settings

1 Dome settings Click the tab.

2 Activate Select the check box if the camera is a dome camera or a

pan/tilt camera.

3 Interface The interface settings must be made first. Only then can

further dome settings follow.

Connection: Click the down arrow and select the interface (BLX = Bilinx,

GBPx = Grabber Biphase port, COMx = serial RS232 port).

Settings... Click the button. A dialog box opens. Make the settings for

the COM interface (bits per second, data bits, stop bits,

parity etc.).

The settings depend on the type of camera.

JVC: 9600/8/1/even

Panasonic 9600/8/1/none (on the Panasonic Dome, the bit

rate must be set manually)

Pelco: 2400/8/1/none

Bosch Domes: The dome settings must be saved.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 157 158

Žádné komentáře

Bosch DiBos Micro Instalační příručka Strana 46