Bosch BC3200RA5 Servisní příručka stáhnout pdf (Strana 24)

Guidance on installing the

Bosch 32 and 32Q water heaters

Choosing the location

The Bosch 32 and 32Q can be installed in both indoor and

outdoor applications, with the correct ﬂue accessories.

Outdoor installations require vent caps to be installed

with the appliances (see page 28), and indoor installations

require Bosch stainless steel ﬂuing (see page 28).

Avoid areas where corrosive or ﬂammable gases may be

present.

Flue exhaust should be considered when siting the

appliance as clearance regulations for both indoor and

outdoor installations exist.

Wall and ceiling clearances

Air inlet

Internal installations of the Bosch 32 require adequate

ventilation as per AS/NZS5601.. Ensure that the air inlet is

adequately sized and is in accordance with AS/NZS5601.

The air inlet needs to be open to the outside air from the

room or area in which the water heater is used.

Clearances for ensuring repair/inspection space

The minimum clearances (shown below) should be

followed to ensure that sufﬁcient room is available for

servicing the appliance.

Openings supplying indoor air.

Technical & Speciﬁcation Information – Bosch 32 Series Water Heaters

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 59 60

Žádné komentáře

Bosch BC3200RA5 Servisní příručka Strana 24