Bosch DVR670 Uživatelský manuál stáhnout pdf

PAGE 1 OF 9

Security Systems

Addendum

DVR670 Installation and Operation manual AM18-Q0617

Security Warning

The remote system access feature, designed to allow users to view their video via a PC or phone, may

compromise their security devices and expose them to malicious use.

To avoid putting your devices and personal information at risk, always consult your network specialist for advice

on network security infrastructure (i.e. MAC filtering, Access Control List).

Bosch accepts no responsibility for possible damage caused by unauthorised access.

iPhone ‘DVR Viewer’ APP

With firmware v2.1.x the iPhone ‘DVR Viewer’ APP version 1.0.3 or higher must be used.

IP camera integration from firmware v2.1 onwards

Introduction

This addendum describes how to integrate an IP camera in the DVR 670 Series (firmware 2.1 onwards).

The main requirements and restrictions are:

• Input from a maximum 4 SD Bosch IP cameras can be recorded on a single DVR 670. Using IP cameras

means the DVR can manage fewer analog cameras; i.e. if you connect 1 SD camera, you will lose 1 analog

camera.

• The DVR does not directly control the camera stream (IPS or resolution) and will only record the available

stream (configured on the camera).

• Event triggered recording (motion and/or input) is not supported for the connected IP cameras.

• Live and playback video of connected IP cameras (SD streams) can be shown on a local DVR monitor A.

• Viewing of IP camera on Mon. B is not supported.

• Video of connected IP camera can also be shown via Web pages and supported PC applications.

• PTZ and fixed SD cameras can be recorded, however only standard PTZ commands and presets (go to, set,

clear) are available (i.e. there is no AUX, iris and focus control). To enable PTZ for IP cameras please select

RS232 or RS485 PTZ communication protocol for the selected channel.

• Supported resolutions :

IPS

Resolution

NTSC

≤ 30 IPS

≤ 702 x 576 (SD/D1/4CIF)

PAL

≤ 25 IPS

≤ 702 x 480 (SD/D1/4CIF)

1 2 3 4 5 6 7 8 9

Shrnutí obsahu

Strany 1 - Addendum

PAGE 1 OF 9 Security Systems Addendum DVR670 Installation and Operation manual AM18-Q0617 Security Warning The remote system access feat

Strany 2 - PAGE 2 OF 9

PAGE 2 OF 9 • An HD camera can be used for recording SD stream 2 for eventual recording and playback on the DVR. Display the live HD stream with Bos

Strany 3 - Step 1

PAGE 3 OF 9 Step 1. Enter the DVR ‘Camera-Camera’ menu. In the Camera-Camera screen (see Figure 1) click on the row for the required channel (the row

Strany 4 - Step 2

PAGE 4 OF 9 Step 2. When the ‘Configuration’ screen appears (see Figure 2), click the Auto Detect button to scan for all the IP cameras in the same su

Strany 5 - Step 3

PAGE 5 OF 9 Step 3. When the new ‘Assign’ screen appears (see Figure 3), click on the row containing the required IP camera from the list (the row wil

Strany 6 - Step 4

PAGE 6 OF 9 Step 4. In the ‘Setup’ screen, assign the required Stream (1 or 2), Video Port (default 554), Command Port (default 80), plus correct User

Strany 7 - Figure 5

PAGE 7 OF 9 Figure 5 Press the Connect button to make the IP connection between the camera and selected channel. If the IP camera resolution setting

Strany 8 - Figure 6

PAGE 8 OF 9 Figure 6 Click OK to acknowledge the message and then change the settings in the IP camera to obtain acceptable resolution settings (see

Strany 9 - PAGE 9 OF 9