Bosch SM070 Specifikace stáhnout pdf (Strana 21)

Vertical Configurability | 21SM Series Heat Pump

6 720 220 406 (2013/9)Revised 08-13

3. Locate the BACK left condensate drain and

remove and retain plastic plug covering the

cutout. (Figure#65)

Figure # 65

4. Reinstall the removed plastic plugs in the

original Condensate Drain Location.

5. Route the flexible plastic tube from FRONT left

corner post to BACK left. (Figure#66)

Figure # 66

6. Measure and cut the condensate drain hose to

the appropriate length.

7. Insert spring onto condensate drain hose.

8. Reinstall condensate drain plastic fitting and

bushing in its new location.(Figure#67)

Figure # 67

HRP Switch Relocation

The HRP Pump Disconnect Switch is shipped loose

inside unit E-Box, to be connected to either FRONT

right corner post or BACK right corner

post.(Figure#68)

Figure # 68

1. From the inside of the unit remove (2) wires

connected to HRP Pump Disconnect Switch.

Avoid kinking the hose and/or creating a dip

which could act as a second internal p-trap.

Double trapped drain lines will not drain

properly.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 99 100

Žádné komentáře

Bosch SM070 Specifikace Strana 21